LUTIFIX Car EVAP Smoke Machine Automotive Smoke Leak Detector Vacuum Fuel Pipe Diagnostic Tester

Features: Powerful Testing Function: This is a professional automotive pipeline leak detection tool. With the help of the visual smoke system, smoke leak detector can quickly locate difficult-to-find leaks in any closed system, such as EVAP system, air intake system, exhaust system, car sealing test, charge air cooler and various pipe fittings. Pressure Gauge Display: This smoke machine equipped with a liquid filled pressure gauge. By observing the change of pressure gauge, the leakage situation is clear at a glance. Air Mode & Smoke Mode: This smoke machine equipped with two modes. The two modes adopt independent switch control design. Air mode switch independent controlled built-air pump. Smoke mode switch independent controlled smoke generator. Large Amount of Smoke: This smoke machine has its own air pump, so it does not have to rely on other air machines. Connect the smoke machine with DC12V battery, it can output lots of smoke within 30 seconds after turning on. Overheat & Anti-frost Protection: This smoke detector is equipped with the latest intelligent protection device. When the temperature of the device exceeds 75, the power protection device will be intelligently activated to turn it off, to ensure the safety of the operator and the device. The device is also suitable for low temperature operation. Wide Application: This smoke machine supports 12V car battery. For this reason it can be used to detect the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats. It is suitable for all car models. Specification: Power Supply: DC 12V, supplied by vehicle battery Smoke Output Flow: 6L/min Test Fluid: Mineral oil or baby oil (Not included) Smoke Output Pressure: <18psi Air Pressure Output: Built-in Air Pump Test Oil Capacity: 10-20ml Package Size: 10.83 x 8.66 x 10.04" Weight: 8.37 lbs Package Includes: 1 x EVAP Smoke Machine 1 x Rubber Connect Part 1 x Hard Rubber Hose Plug Set 1 x Standard Cone Adapter 1 x Universal Airbag Adapter 1 x Power Cord Clamp 1 x Valve Core Wrench 1 x Test Oil Refill Bottle 1 x EVAP Special Connector 1 x Smoke Hose 1 x User Manual How to operate: 1. Fill in 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work. 4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. Caution: 1. When you use this smoke machine for the first time, fill in 10ml baby oil. Please be careful NOT to beyond this range. 2. The testing liquid: both liquid paraffin and baby oil are OK. 3. Fresh oil can be filled with only when the smoke gets thin, and it cant be filled over 20ml each time. 4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 5. During the process of leak detection, please keep away from smoke-sensitive parts. 6. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 , it will automatically turn off the power. In this case, please operate it later. 8. The round part of this detector has temperature, please be careful to avoid burns. 9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.